Global Wind Turbine Blade Market 2018 Industry Trend and Forecast 2023
Global Wind Turbine Blade Market by Manufacturers, Countries, Type and Application, Forecast to 2023 Report “ Provides In-Depth Analysis Of Parent Market Trends, Macro-Economic Indicators And Governing Factors Along With Market Attractiveness As Per Segme
(EMAILWIRE.COM, August 02, 2018 ) Introduction:
Wind turbine blade is mounted on the wind turbine. Most wind turbines have three blades, though there are some with two blades. Blades are generally 30 to 50 meters (100 to 165 feet) long, with the most common sizes around 40 meters (130 feet). Longer blades are being designed and tested. Blade weights vary, depending on the design and materials—a 40 meter LM Glasfiber blade for a 1.5 MW turbine weighs 5,780 kg (6.4 tons) and one for a 2.0 MW turbine weighs 6,290 kg (6.9 tons).
Scope of the Global Wind Turbine Blade Market Report
This report focuses on the Wind Turbine Blade in global market, especially in North America, Europe and Asia-Pacific, South America, Middle East and Africa. This report categorizes the market based on manufacturers, regions, type and application.
Request a Sample of this Report @ http://www.orbisresearch.com/contacts/request-sample/2189646
The worldwide market for Wind Turbine Blade is expected to grow at a CAGR of roughly xx% over the next five years, will reach xx million US$ in 2023, from xx million US$ in 2017, according to a new GIR (Global Info Research) study.
The wind power generation industry has grown rapidly and expanded worldwide in recent years to meet high global demand for clean electricity. In addition, from 2008 to 2014, the cumulative global power generating capacity of wind turbine installations in GWs increased by more than three times. Wind energy is now used in over 80 countries, 24 of which have more than 1 GW installed. The rapid growth in the wind power generation industry has been driven by population growth and the associated increase in electricity demand, widespread emphasis on expanded use of renewable energy and water resource management, the increasing effectiveness and cost- competitiveness of wind energy and accelerated urbanization in developing countries, among other factors.
Rapid development of global wind energy stimulates the wind turbine blade market as well. Global wind turbine blade production increased from 60155 Units in 2013 to 80972 Units in 2015 with the GACR of 16.02%.
The development of larger wind turbines and recent improvements in wind blade design, materials and manufacturing technology have significantly increased the power generating capacity of wind turbines. Today, wind blades are typically composed of advanced, high-strength, lightweight and durable composite materials. In addition, longer wind blades, which allow for a larger area of wind to be swept by the wind blades, coupled with taller towers, results in greater energy capture and reduces the overall cost of wind energy.
According to the wind turbine, the blades can be divided into the 1.5 MW, 2.0 WM, 3.0 WM, 5.0 WM and so on. The size of blades has positive correlation with the powder of turbines. Blades manufacturers are keen on their blade technology innovation, no matter from the size or the key raw materials.
With the promising market of wind energy, more and more Companies have entered in the wind turbine field in the recent few years. However, LM Wind Power, Vestas, Enercon , Tecsis are still the leaders, when considering the technology and product performance. The four Companies accounted for about 22% production share in 2015.
China has become the faster and the most promising market of wind turbine blade in the recent two years. As information revealed, in 2015, China accounted for about nearly half of wind energy new installed capacity in the world. It is predicted that the wind turbine blade market in China will become more intensified in the coming years, as more and more international Companies cast attention on the region.
Browse the Full Report @ http://www.orbisresearch.com/reports/index/global-wind-turbine-blade-market-by-manufacturers-regions-type-and-application-forecast-to-2023
This report covers Analysis of Global Wind Turbine Blade Market Segment by Manufacturers
LM Wind Power
Vestas
Enercon
Tecsis
Gamesa
Suzlon
TPI Composites
Siemens
CARBON ROTEC
Acciona
Inox Wind
Zhongfu Lianzhong
Avic
Sinoma
TMT
New United
United Power
Mingyang
XEMC New Energy
DEC
Haizhuang Windpower
Wanyuan
CSR
SANY
Global Wind Turbine Blade Market Segment by regional analysis covers
North America (USA, Canada and Mexico)
Europe (Germany, France, UK, Russia and Italy)
Asia-Pacific (China, Japan, Korea, India and Southeast Asia)
South America (Brazil, Argentina, Columbia etc.)
Middle East and Africa (Saudi Arabia, UAE, Egypt, Nigeria and South Africa)
Make an enquiry before buying this report @ http://www.orbisresearch.com/contacts/enquiry-before-buying/2189646
Global Wind Turbine Blade Market Segment by Type
1.5 MW
1.5 MW
1.5-2.0 MW
2.0 MW
2.0-3.0 MW
3.0 MW
3.0-5.0 MW
5.0 MW
Global Wind Turbine Blade Market Segment by Applications, can be divided into
Energy
Plastics
Composites
Other
Some of the Points cover in Global Wind Turbine Blade Market Research Report is:
Chapter 1: Describe Wind Turbine Blade Industry
Introduction,
Product Scope,
Market Overview,
Market Opportunities,
Market Risk,
Market Driving Force
Chapter 2: To analyze the top manufacturers of Wind Turbine Blade Industry in 2016 and 2017
Sales
Revenue and price
Chapter 3: Competitive analysis among the top manufacturers in 2016 and 2017
Sales
Revenue and market share
Chapter 4: Global Wind Turbine Blade Market by regions from 2013 to 2018
Sales
Revenue and market share
Chapter 5, 6, 7 and 8: Global Wind Turbine Blade Market by key countries in these regions
Sales
Revenue and market share
Chapter 9 and 10: Global Wind Turbine Blade Market by type and application from 2013 to 2018
Sales
Revenue and market share
Growth rate
Chapter 11:Wind Turbine Blade Industry Market forecast from 2018 to 2023
Regions
Type and application with sales and revenue
Chapter 12 and 13:Wind Turbine Blade Industry
Sales channel
Distributors
Traders and dealers
Appendix
Data source
About Us:
Orbis Research (orbisresearch.com) is a single point aid for all your market research requirements. We have vast database of reports from the leading publishers and authors across the globe. We specialize in delivering customized reports as per the requirements of our clients. We have complete information about our publishers and hence are sure about the accuracy of the industries and verticals of their specialization. This helps our clients to map their needs and we produce the perfect required market research study for our clients.
Contact Us:
Hector Costello
Senior Manager – Client Engagements
4144N Central Expressway,
Suite 600, Dallas,
Texas - 75204, U.S.A.
Phone No.: +1 (214) 884-6817; +912064101019
Wind turbine blade is mounted on the wind turbine. Most wind turbines have three blades, though there are some with two blades. Blades are generally 30 to 50 meters (100 to 165 feet) long, with the most common sizes around 40 meters (130 feet). Longer blades are being designed and tested. Blade weights vary, depending on the design and materials—a 40 meter LM Glasfiber blade for a 1.5 MW turbine weighs 5,780 kg (6.4 tons) and one for a 2.0 MW turbine weighs 6,290 kg (6.9 tons).
Scope of the Global Wind Turbine Blade Market Report
This report focuses on the Wind Turbine Blade in global market, especially in North America, Europe and Asia-Pacific, South America, Middle East and Africa. This report categorizes the market based on manufacturers, regions, type and application.
Request a Sample of this Report @ http://www.orbisresearch.com/contacts/request-sample/2189646
The worldwide market for Wind Turbine Blade is expected to grow at a CAGR of roughly xx% over the next five years, will reach xx million US$ in 2023, from xx million US$ in 2017, according to a new GIR (Global Info Research) study.
The wind power generation industry has grown rapidly and expanded worldwide in recent years to meet high global demand for clean electricity. In addition, from 2008 to 2014, the cumulative global power generating capacity of wind turbine installations in GWs increased by more than three times. Wind energy is now used in over 80 countries, 24 of which have more than 1 GW installed. The rapid growth in the wind power generation industry has been driven by population growth and the associated increase in electricity demand, widespread emphasis on expanded use of renewable energy and water resource management, the increasing effectiveness and cost- competitiveness of wind energy and accelerated urbanization in developing countries, among other factors.
Rapid development of global wind energy stimulates the wind turbine blade market as well. Global wind turbine blade production increased from 60155 Units in 2013 to 80972 Units in 2015 with the GACR of 16.02%.
The development of larger wind turbines and recent improvements in wind blade design, materials and manufacturing technology have significantly increased the power generating capacity of wind turbines. Today, wind blades are typically composed of advanced, high-strength, lightweight and durable composite materials. In addition, longer wind blades, which allow for a larger area of wind to be swept by the wind blades, coupled with taller towers, results in greater energy capture and reduces the overall cost of wind energy.
According to the wind turbine, the blades can be divided into the 1.5 MW, 2.0 WM, 3.0 WM, 5.0 WM and so on. The size of blades has positive correlation with the powder of turbines. Blades manufacturers are keen on their blade technology innovation, no matter from the size or the key raw materials.
With the promising market of wind energy, more and more Companies have entered in the wind turbine field in the recent few years. However, LM Wind Power, Vestas, Enercon , Tecsis are still the leaders, when considering the technology and product performance. The four Companies accounted for about 22% production share in 2015.
China has become the faster and the most promising market of wind turbine blade in the recent two years. As information revealed, in 2015, China accounted for about nearly half of wind energy new installed capacity in the world. It is predicted that the wind turbine blade market in China will become more intensified in the coming years, as more and more international Companies cast attention on the region.
Browse the Full Report @ http://www.orbisresearch.com/reports/index/global-wind-turbine-blade-market-by-manufacturers-regions-type-and-application-forecast-to-2023
This report covers Analysis of Global Wind Turbine Blade Market Segment by Manufacturers
LM Wind Power
Vestas
Enercon
Tecsis
Gamesa
Suzlon
TPI Composites
Siemens
CARBON ROTEC
Acciona
Inox Wind
Zhongfu Lianzhong
Avic
Sinoma
TMT
New United
United Power
Mingyang
XEMC New Energy
DEC
Haizhuang Windpower
Wanyuan
CSR
SANY
Global Wind Turbine Blade Market Segment by regional analysis covers
North America (USA, Canada and Mexico)
Europe (Germany, France, UK, Russia and Italy)
Asia-Pacific (China, Japan, Korea, India and Southeast Asia)
South America (Brazil, Argentina, Columbia etc.)
Middle East and Africa (Saudi Arabia, UAE, Egypt, Nigeria and South Africa)
Make an enquiry before buying this report @ http://www.orbisresearch.com/contacts/enquiry-before-buying/2189646
Global Wind Turbine Blade Market Segment by Type
1.5 MW
1.5 MW
1.5-2.0 MW
2.0 MW
2.0-3.0 MW
3.0 MW
3.0-5.0 MW
5.0 MW
Global Wind Turbine Blade Market Segment by Applications, can be divided into
Energy
Plastics
Composites
Other
Some of the Points cover in Global Wind Turbine Blade Market Research Report is:
Chapter 1: Describe Wind Turbine Blade Industry
Introduction,
Product Scope,
Market Overview,
Market Opportunities,
Market Risk,
Market Driving Force
Chapter 2: To analyze the top manufacturers of Wind Turbine Blade Industry in 2016 and 2017
Sales
Revenue and price
Chapter 3: Competitive analysis among the top manufacturers in 2016 and 2017
Sales
Revenue and market share
Chapter 4: Global Wind Turbine Blade Market by regions from 2013 to 2018
Sales
Revenue and market share
Chapter 5, 6, 7 and 8: Global Wind Turbine Blade Market by key countries in these regions
Sales
Revenue and market share
Chapter 9 and 10: Global Wind Turbine Blade Market by type and application from 2013 to 2018
Sales
Revenue and market share
Growth rate
Chapter 11:Wind Turbine Blade Industry Market forecast from 2018 to 2023
Regions
Type and application with sales and revenue
Chapter 12 and 13:Wind Turbine Blade Industry
Sales channel
Distributors
Traders and dealers
Appendix
Data source
About Us:
Orbis Research (orbisresearch.com) is a single point aid for all your market research requirements. We have vast database of reports from the leading publishers and authors across the globe. We specialize in delivering customized reports as per the requirements of our clients. We have complete information about our publishers and hence are sure about the accuracy of the industries and verticals of their specialization. This helps our clients to map their needs and we produce the perfect required market research study for our clients.
Contact Us:
Hector Costello
Senior Manager – Client Engagements
4144N Central Expressway,
Suite 600, Dallas,
Texas - 75204, U.S.A.
Phone No.: +1 (214) 884-6817; +912064101019
Contact Information:
Orbis Research
Hector Costello
Tel: +1 (214) 884-6817
Email us
----
This press release is posted on EmailWire.com -- a global newswire that provides Press Release Distribution Services with Guaranteed Results
Orbis Research
Hector Costello
Tel: +1 (214) 884-6817
Email us
----
This press release is posted on EmailWire.com -- a global newswire that provides Press Release Distribution Services with Guaranteed Results